
Used Mitsui Seiki HS 3 A Dual-Station Horizontal Machining Center
MITSUISEIKI · HS3A
Year on request · FANUC · China
This HM 635 II is a CNC horizontal machining center built for heavy, accurate production work on box-type and prismatic parts. Two identical units are available. The machine carries a Doosan Hm 635 II nameplate and is equipped with a FANUC Doosan-FANUC i Series CNC control system, with FANUC servo drives housed in the electrical cabinet. The spindle is BT50 and the tool magazine holds 40 tools, supporting sustained milling, drilling, boring and tapping cycles with minimal operator intervention. The worktable measures 630 x 630 mm and is arranged as a twin-pallet exchange system, allowing parts to be loaded on one pallet while machining continues on the other. All three axes run on box guideways for rigidity and damping under heavy cutting loads. Axis travel is 1000 mm in X, 800 mm in Y and 850 mm in Z. Chip removal is handled by a chain-type chip conveyor, and the machine is fitted with a through-spindle coolant system for deep-hole drilling and effective chip evacuation. Both units are offered as complete, in-production machines.
Twin 630 x 630 mm pallet exchange system 40-tool magazine Chain-type chip conveyor Through-spindle coolant system FANUC servo drives in the electrical cabinet Doosan-FANUC i Series operator panel
| Worktable size | 630 x 630 mm |
|---|---|
| Pallet exchange | Twin pallet, automatic exchange |
| Spindle taper | BT50 |
| Tool magazine capacity | 40 tools |
| Guideway type | Box guideways on X/Y/Z axes |
| X/Y/Z travel | 1000 x 800 x 850 mm |
| Controller | FANUC Doosan-FANUC i Series |
| Chip conveyor | Chain-type |
| Coolant system | Through-spindle coolant |
| Brand | DN Solutions |
| Control system | FANUC (Doosan-FANUC i Series) |
Related inventory

MITSUISEIKI · HS3A
Year on request · FANUC · China

Nantong Keji · MCH 630
Year on request · FANUC 31i-A · China

Wintop · 500
Year on request · Siemens · China