Back to machines

Used HIKE E 12 Gantry CNC Drilling and Milling Machine with GSK 980 MDi Control

The HIKE E 12 is a gantry-type CNC drilling and milling machine built on a heavy-duty machine bed with a two-linear, one-box guideway configuration for stable, accurate work on large plate and frame components. The worktable measures 1200 x 1200 mm and carries up to 2 t, with a door width of 1600 mm and door height of 650 mm for generous access to the machining zone. Axis travel is 1200 mm in X, 1250 mm in Y and 240 mm in Z. The machine is equipped with a Morse No. 5 spindle and a 16-step hydraulic automatic speed change, allowing quick shift between drilling and milling speeds under load. Control is provided by a GSK 980 MDi absolute bus CNC system, paired with GR 2000 series servo drives in the electrical cabinet. This unit is in approximately 95% new condition. It was installed and used only for sample parts, so its working time is minimal and the machine presents essentially as new. It is an economical gantry drilling and tapping solution suited to batch drilling, tapping and light milling operations.

Machine Code
MIL261104
Year
On request
Location
China
Usage Hours
On request

Accessories

GSK 980 MDi CNC control system with absolute bus GR 2000 series servo drives

Main Specifications

Worktable size1200 x 1200 mm
Door width1600 mm
Door height650 mm
X/Y/Z travel1200 / 1250 / 240 mm
Table load capacity2 t
Guideway configurationTwo linear guideways and one box guideway
Spindle taperMorse No. 5 (MT 5)
Spindle speed change16-step hydraulic automatic speed change
CNC controlGSK 980 MDi absolute bus system
Machine TypeCNC Gantry Drilling and Milling Machine
BrandShenyang Haike
ModelE 12(50)
Condition95% new
Machine BedHeavy-duty bed
ControllerGSK 980 MDi absolute bus system
Usage HistoryOnly used for sample machining
Control systemGSK 980

Related inventory

More CNC Milling Machine machines

View category
Used HIKE E 12 Gantry CNC Drilling and Milling Machine with GSK 980 MDi | ROC CNC MACHINE TOOLS