Used Guosheng 6028 T five-face gantry machining center with Fanuc MF Plus control. Worktable size is 6000 x 2000 mm, X/Y/Z travel is 6500 x 3300 x 1000 mm, door width is 2800 mm, and table load capacity is 25 t. The spindle nose-to-table distance is 160-1600 mm, and the geared head BT50 spindle has a maximum speed of 6000 rpm. It is equipped with a 24-tool magazine and a semi-automatic head, with two linear guideways and one box guideway. Year 2024. Available for inspection in China.
Semi-automatic head
| Worktable size | 6000 x 2000 mm |
|---|---|
| X/Y/Z travel | 6500 x 3300 x 1000 mm |
| Door width | 2800 mm |
| Table load capacity | 25 t |
| Spindle nose to table distance | 160-1600 mm |
| Spindle type | Geared head BT50 |
| Maximum spindle speed | 6000 rpm |
| Tool magazine capacity | 24 tools |
| Controller | Fanuc MF Plus |
| Guideway configuration | Two linear guideways and one box guideway |
| Year | 2024 |
Related inventory
Xinnuo Precision (Wannan) · 1060B
Used, 95% new, very little used; idle machine from a large factory.
Taiqun · T-V1165
99% new, idle, only a few hundred hours of machining time.
Aogexi · W380D
Used; 99% new, almost new condition
