Runxing 750 Drilling and Tapping Center
Runxing · 750
Used, ready for shipment.
Drilling MachineDR260813Year on requestController on requestChina
AvailableDrilling Machine
Used Qiaofeng T-7 C Drilling and Tapping Center with Mitsubishi M 80
Qiaofeng T-7 C Drilling and Tapping Center with Mitsubishi M 80 control. Equipped with a BT30 direct-drive spindle running at 20000 rpm, 21-station servo tool magazine, three-axis linear guideways, and a worktable size of 850 x 400 mm. Accuracy inspection completed: spindle runout 0.01 mm, spindle verticality (front/side) 0.01 mm, and repeatability 0.003 mm. One unit includes a tool setter; the other does not.
- Machine Code
- DR260812
- Year
- 2000
- Location
- China
- Usage Hours
- On request
Accessories
Tool setter (one unit without)
Main Specifications
| Spindle taper | BT30 |
|---|---|
| Spindle connection | Direct drive |
| Spindle speed | 20000 rpm |
| Spindle motor power | 5.5 kW |
| X/Y/Z travel | 700 x 400 x 350 mm |
| Rapid traverse | 48 m/min |
| Worktable size | 850 x 400 mm |
| Spindle nose to table surface | 500 mm |
| Tool magazine capacity | 21 tools |
| Tool magazine type | Servo |
| Guideway type | Three-axis linear guideways |
| Spindle runout | 0.01 mm |
| Spindle verticality (front) | 0.01 mm |
| Spindle verticality (side) | 0.01 mm |
| Repeatability | 0.003 mm |
| Tool setter | Included (one unit without) |
Related inventory
More Drilling Machine machines
Used Doosan T 4050 Drilling and Tapping Center with Mitsubishi M 70 Control
Doosan · T4050
Used, located in Nantong factory, 36 identical machines available
Drilling MachineDR2608112015Mitsubishi M 70Nantong, China
Used Qiaofeng T 5 Drilling and Tapping Center with Fanuc Oi-MF
Qiaofeng · T5
Used, good condition
Drilling MachineDR2608102000Fanuc Oi-MFChina