AvailableCNC Drilling Machine

Used Tsugami VA 3 Drilling and Tapping Center with FANUC 0i-MF Plus (2021)

Used Tsugami VA 3 Drilling and Tapping Center, manufactured in 2021. Equipped with FANUC 0i-MF Plus control, BT30 direct-coupled spindle, 20,000 rpm maximum speed, 20-tool magazine, and 9 kW spindle motor. The machine features linear guideways on all three axes, travels of 500 x 400 x 350 mm, rapid traverse of 48 m/min, worktable size of 650 x 400 mm, and spindle nose to table distance of 150-500 mm. Accuracy inspection results: spindle runout 0.01 mm, front/side straightness 0.01 mm, and three-axis repeatability 0.003 mm.

Machine Code: VMC2608127
Year: 2021
Location: China
Usage Hours: On request

Contact access

Dealer contact details are distinct from the machine location. Availability and prices require confirmation with the seller.

Loading…

Main Specifications

Control system	FANUC 0i-MF Plus
Spindle taper	BT30
Spindle speed	20000 rpm
Tool magazine capacity	20 tools
Spindle motor power	9 kW
Guideways	Linear guideways in X/Y/Z
X/Y/Z travel	500 x 400 x 350 mm
Rapid traverse	48 m/min
Worktable size	650 x 400 mm
Spindle nose to table distance	150 - 500 mm
Spindle runout	0.01 mm
Front straightness	0.01 mm
Side straightness	0.01 mm
Three-axis repeatability	0.003 mm