DisponívelCNC Lathe
Used Yingtai STC 4560 CNC Lathe with GSK 988 TA
Used Yingtai STC4560 CNC lathe available from stock in China. The machine was purchased and installed at the end of 2024 and has seen little use since. It is equipped with a GSK 988TA CNC system, as confirmed on the control screen, and an 8-inch hollow chuck with a 52 mm through bore. The 8-station servo wide-body servo turret is of the same type used on Mazak machines, and the Z axis runs on high-low rail, large-span Taiwan Yintai guideways. Photo-verified details include the YINGTAI 4560 STC machine nameplate, the GSK 988TA control display, the 8-station servo turret, the 8-inch hollow chuck, and the chip conveyor. The machine is reported to retain its original paint and to be in very good condition. Specifications stated by the supplier include a swing over bed of 520 mm, maximum machining diameter of 320 mm, Z axis travel of 600 mm, and machining accuracy of 0.01 mm. The machine information is translated from the original Chinese supplier notes and can be verified by video or on-site inspection.
- Código da Máquina
- CL260954
- Ano
- 2024
- Localização
- China
- Horas de Uso
- Sob consulta
Acessórios
8-inch hollow chuck (through bore 52 mm), 8-station servo wide-body servo turret, Taiwan Yintai guideway on Z axis with high-low rail and large span, chip conveyor.
Principais Especificações
| Swing over bed | 520 mm |
|---|---|
| Maximum machining diameter | 320 mm |
| Z axis travel | 600 mm |
| Machining accuracy | 0.01 mm |
| Chuck | 8-inch hollow chuck |
| Through bore | 52 mm |
| Tool turret | 8-station servo wide-body servo turret |
| Machine Type | CNC Lathe |
| Brand | Zhejiang Yingtai |
| Model | STC 4560 |
| Condition | Purchased and installed at end of 2024, low usage |
| Controller | GSK 988 TA |
| Guideway Configuration | Z-axis high-low rails, large span |
| Guideway Brand | Taiwan Yintai |
| Chip Conveyor | Longtou chip conveyor |
| Control system | GSK 988 TA |
Inventário relacionado
Mais máquinas de CNC Lathe
