Used Xiangyu T 6 Vertical Machining Center with 24-Tool Disc Magazine
ENJOYFAME · T6
Year on request · Controller on request · China
AvailableVertical Machining Center
Used DN Solutions DNM 6705 Vertical Machining Center with FANUC 0i-MF Plus
Used DN Solutions DNM 6705 vertical machining center, built in 2018 and available from stock. The machine is equipped with the FANUC 0i-MF Plus control system with DN Solutions secondary development, and the spindle nose to table distance is 980 mm thanks to the raised Z axis. The BT40 direct-drive spindle runs up to 12,000 rpm and features through-spindle coolant. Tool changing is handled by a 24-tool arm-type automatic tool changer, and all three axes run on roller linear guideways for rigidity and smooth motion. The worktable measures 1500 x 670 mm with X/Y/Z travels of 1300 / 670 / 626 mm. Chip removal is covered by two spiral chip conveyors together with a rear chain-type chip conveyor, and the machine also includes a spindle oil cooler and an oil mist collector.
- Machine Code
- VMC2609211
- Year
- 2018
- Location
- China
- Usage Hours
- On request
Accessories
24-tool arm-type tool magazine; Through-spindle coolant; Two spiral chip conveyors; Rear chain-type chip conveyor; Spindle oil cooler; Oil mist collector
Contact access
Dealer contact details are distinct from the machine location. Availability and prices require confirmation with the seller.
Loading…
Main Specifications
| Machine type | Vertical machining center |
|---|---|
| Year | 2018 |
| Controller | FANUC 0i-MF Plus with DN Solutions secondary development system |
| Spindle taper | BT40 |
| Spindle speed | 12000 rpm |
| Spindle drive | Direct-drive |
| Spindle nose to table distance | 980 mm |
| Through-spindle coolant | Yes |
| Tool magazine capacity | 24 tools (arm-type ATC) |
| Guideway type | Roller linear guideways (3 axes) |
| Worktable size | 1500 x 670 mm |
| X-axis travel | 1300 mm |
| Y-axis travel | 670 mm |
| Z-axis travel | 626 mm |
| Brand | DN Solutions |
| Model | DNM 6705 |
| Guideway Configuration | Roller linear guideways on 3 axes |
| Chip Conveyor | Two screw chip conveyors |
| Oil Cooler | Spindle oil cooler |
| Country Of Origin | South Korea |
| Z-axis Configuration | Raised |
| Tool Magazine Type | Arm-type (inverter) |
| Oil Mist Collector | Yes |
| Control system | FANUC 0i-MF Plus |
| Year of manufacture | 2018 |
Related inventory
More Vertical Machining Center machines
Used JIA TIE JTDM-540 Vertical Machining Center with Siemens 828 D
JIA TIE · JTDM-540
2020 · Siemens · China
