AvailableMachining Center

Used PRATIC PHA-CNC 3000 Gantry Machining Center with FANUC 0i-MF Plus Control

PRATIC PHA-CNC 3000 gantry machining center with a 3000 x 2000 mm worktable and X/Y/Z travels of 3000 / 2000 / 800 mm. Equipped with the FANUC 0i-MF Plus CNC control system, a BT40 spindle running at up to 10,000 rpm, and a 24-tool arm-type automatic tool changer. The X axis is built on heavy-duty linear guideways with rack-and-pinion drive, while the Y and Z axes use heavy-duty linear guideways with ball screw drive. The machine was previously used for new energy vehicle component machining and has run only a few sample cuts; it has seen little use and is well maintained, clean and in good condition. Available for inspection.

Machine Code: MC261008
Year: 2000
Location: China
Usage Hours: On request

Accessories

24-tool arm-type automatic tool changer; FANUC 0i-MF Plus CNC control system

Open machine video Email Inquiry

Main Specifications

Worktable size	3000 x 2000 mm
X/Y/Z travel	3000 / 2000 / 800 mm
Spindle taper	BT40
Spindle speed	10,000 rpm
Tool magazine capacity	24 tools (arm-type ATC)
Control system	FANUC 0i-MF Plus
X axis drive	Heavy-duty linear guideways with rack-and-pinion drive
Y/Z axis drive	Heavy-duty linear guideways with ball screw drive
Machine Type	3 m Puladi Machining Center
Machine Condition	Previously used for new energy vehicle parts; only ran samples a few times after purchase; low usage; well maintained; like-new condition; contact if interested
Brand	PRATIC
Year of manufacture	2000